The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Radio Suppression Relay Plug 900 1994

I have had five 7/9 series cars over the years. I have only had one issue with the plug/connector on the RSR (on an 88 740)and that was a bit of corrosion on one of female spades. A quick clean up solved the problem.

I wouldn't worry about the connector failing and stranding you as I think the chances of that are extremely slim. I would be more concerned about a cracked solder joint in the relay letting you down. Carry a spare along with a fuel injection relay and eliminate the worry.

Trouble shooting a failure to run that might be associated with the radio suppression relay is a simple task. Just remove the relay and use two pieces of wire to jumper across the plug. Use the two jumpers to directly connect the four heavier gauge wires. Just be sure you are connecting wires of the same color code.
--
Any twenty minute job is just a broken bolt away from a three day ordeal






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.