The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Idle adjustment 91 740 Regina 700

If the idle rpm drops down to 300-400, in fact anything below 700, then the ECU probably doesn't know the throttle is closed and it's supposed to be maintaining idle using the IAC valve (idle air). Best guess is the TPS (throttle position switch) is now incorrectly adjusted or the connector is not properly seated. With the engine not running, do you hear the TPS click just as you open the throttle spindle? It shouldn't be set on the hairy edge, but soon after the plate starts moving. Other issues with idle adjustment are the throttle linkage rod and throttle cable adjustment restricting the throttle plate from fully closing and clicking the switch. If needed there are OBD tests you can do at the diagnostic connector to check all of this out -see the FAQ here.
--
Dave -still with 940's, prev 740/240/140/120 You'd think I'd have learned by now






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.