The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Did I make a big mistake with ABS on my '92 240? 200

Good advice also. I have read and evidently frequently asked questions and the 900 series factory service manual, and heard much information here on the brick board that I know what you're talking about. I'm forgetting the name of that pressure regulator/separator also. I cleaned the one on my car and dried it well. It has no leaks when under pressure. I do not see any electrical connection to it for some kind of a sensor.
I have read in several places of the piston getting stuck in one of its functional distribution positions and causing a problem which sounds like mine. The last time I took it out there is very little if any braking force only to rear wheels, and the two front wheels were very hot and overheated starting to smoke.
Having just discovered that I have a leak around the gasket seal between the brake fluid reservoir and the master cylinder, I am suspicious that some air may be getting in there, causing my problem.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.