The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

940 with no instrument cluster: Will it run and drive? 900

Hi Eddystone,

It should run OK without the cluster.
If it's a turbo, plug the vac boost hose with a golf tee.

There is a fuse in the +12 volt leg from D4 to the speedo

Check for bad solder joints (continuity) in the legs:
D4 to the + terminal of the speedo
D1 to the S+ terminal of the speedo
D2 to the S- terminal (Gnd) of the speedo
A2 to the S- terminal (Gnd) of the speedo

D = 4 pin connector in back of the speedo
Leave your email address if you want the info from the wiring manual.

Pay attention to possible bad through hole solder connections
where the track leaves one side of the PCB and goes along on the other side
and returns through another joint to travel on the top again.
I had to solder a jumper between a short segment of the fuel gauge PCB track
between two of these through-hole PCB connections to fix a ratty fuel gauge.

Good luck, Bill






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.