The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rim Spot Weld Sealer 1800 1973

Probably best not to waste time and money on rims that do not have a safety bead. These are for tubeless tyres. Earlier rims which used tubes are still fine if you mean to use tubes. These rims will have a larger hole for the valve as it is part of the tube. Current standard valves are too small for these but you can get larger pop in valves to convert the rims. It will mean no safety bead, so use at your own risk. The safety bead also keeps the bead from moving around a bit which in itself can cause loss of pressure over time. The early solid wheel was never made with a safety bead a far as I know. Early perforated rims also had no bead but the part number wasn't changed when the safety bead was added. The bead can be seen when there is a tyre on the wheel.
A good coat of paint will seal the rim if rust free. Soft paint will tend to be seal better due to the pressure so enamel likely better than baked 2 pack.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.