The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1992 240 Wagon - Stuck brake caliper or brake hose issue? 200 1992

Hi,

This is probably too late for you, but for others, anytime an e-brake is off it is the ideal time to inspect and repack your rear outer bearing. There are only 4 easily accessible bolts to remove. You should have an inner seal on hand because that's what keeps the rear end oil from washing the grease out of the bearing.

You don't need to remove the bearing from the axle to clean and repack. Just pull the axel out a few inches and put a bucket under it. Solvent and a chip brush and fresh grease. The seal goes into the axel housing. A half hour job.

If a bearing fails on the road and you keep driving it can destroy the axle housing. If you call for a tow and get it to a garage it will be very expensive.

Rear bearings with a failed inner seal running in rear-end oil can go for a long time if you don't mind the noise and a rough ride.

Peter







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.