The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No Compression After re-built 120-130

Good Afternoon Everyone:
Removed the cylinder head and all appears fine. No bent valves,piston looked intact, no antifreeze in oil. Prior to the rebuild there was antifreeze in the oil, hence the rebuild. All looks fine, I'm puzzled about this. I'm about to put the carbureted head and see if it does the same. In the mean time, to answer some of your questions, this is a B20 with the cam on the side. All rocker arms, push rods appear fine as well. I removed the valve cover while engine was running as someone had suggested and they all move up and down, however, I don't know to what degree. They all seem to be moving up and down the same across all valves.

I'm going to try and put the carbureted cylinder head this weekend and come back and let you know what happens. I'm on my third headgasket with this build. Will be re-using the last one as it appears to be ok.

Thank you all for your input.

Luis






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.