The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tailgate perimeter sealing rubber 900 1997

In general, I don't recall Volvo using much in the way of adhesives to hold the door or tailgate opening rubber gaskets in place, also the trunk seal. Having said that, with used rubber I would be tempted to tack them down in a few places just to make sure, like a small blob every 8" or so, especially at the corners. Just don't use a blob that would make a lump in the gasket. I have in the past used plumber's caulk behind the rubber to raise the gasket a bit after pulling a strip of newspaper to reveal less that a tight fit in that spot. A number of flexible adhesives would likely work well, including RTV, but not so much silicone-type sealants, rather something with a bit more tack, also rated for rubber. What I would probably do is start by installing them dry and as you go, if it seems like they could easily be pulled out, then go for the adhesives.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.