The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Seeking a float switch source for low coolant circuits

That relay might be a dual form A, the rare one used in the headlight circuit. To verify, check continuity between 30 and either of the 87s. If none, then set that relay aside and look for one with 87a and test it the same way. You're looking for continuity between 30 and some other pin as the normally closed contact.

The coil is the load your float switch is going to send power to. Most relays, it won't matter which side, 85 or 86 is the positive side, but some have flyback diodes internal wired across the coil, so the convention is to use the relay with terminal 86 toward the battery +. See the Wikipedia on din 72552, but don't let it stand in your way on the other terminal designation.
--
Art Benstein near Baltimore

Q: Do you know how an electrician tells if he's working with AC or DC power?

A: If it's AC, his teeth chatter when he grabs the conductors. If it's DC, they just clamp together.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.