The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ignition Key Stuck in Position 3 200 1981

Thanks everyone for your advice. I have the upper and lower plastic covers off the steering column and the lock is sticking out an inch or so from the metal dash. I've felt around it outside and inside the dash and haven't detected a pin or anything else that might retain the lock. Unfortunately the green manuals don't go into anything but removing the entire lock and "dead bolt" that locks the steering. Because of the deadbolt, the entire assembly has to come straight out of the side. So, the column would have to come out to remove it.

I'm going to remove the electrical switch and try using it drive the car. The steering column is not locked with the key in the #3 position. I purchased the switch from IPD and installed it about a year ago. The old switch was intermittent and I had to wiggle the key sometimes to make good contact.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.