The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Water pump installation details 900 1995

Thanks Dave Stevens!

I replaced the water pump a couple days ago and used the small screw driver method in the round hole on the close to bottom of the pump (rstarkie's post) to lift the pump and get the 3 screws very easily started. The pump was a Hepu.

Prepping, I ran a 6mm X 1.00 tap into the 3 holes and blew them out with compressed air. One of the holes on top was a bit hard to screw in a bolt before cleaning it out with the tap.

I used a very thin coating of gun grease on the gasket and "Permatex water pump and thermostat RTV #22071" on the top of the mushroom gasket. The RTV helped slide the mushroom gasket into place on the head with a little help from finger pushing.

No leaks!

I left the P.S. belt looser (more loose?) than I have in the past in hopes of the pump lasting a long time.

--
Mine:3-940s running; dtrs:4-940s running






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.