The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

PNP switch 900

While I'm thinking of it, in case it turns out you end up needing to replace the PNP neutral safety switch, I just remembered that the one for the '94-'95 AW70 trans (p/n 9130295) is no longer available. The one for the earlier '91-'92 900s and 700s (p/n 3544164) is the same switch and is available, you just need to unsolder and transfer the wiring connector. Also while I'm thinking of it, the ignition lock cable that goes to a threaded adjuster sleeve on the front of the shifter assembly needs to be slackened off if you need to unhook it from its pawl to remove the shifter. There's no adjustment spec that I can find, so simply count the faces as you back it off so you can restore the original adjustment. Adjustment doesn't appear to be that critical.
--
Dave -still with 940's, prev 740/240/140/120 You'd think I'd have learned by now






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.