The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

90 740 Regina codes for IAC and Knock sensor (and low/high voltage) 700

Hi Will,

Measure your battery engine off and running @2K RPM
measure directly to the battery anodes and not the clamps
see 12.6V off 14.0V running

I suppose you were too busy running down the foul bouquet in your car?
Now that you found Jimmy Hoffa in the trunk and got rid of him, maybe you'll
see what's going on at the battery?
Hint: clean all the piggy back terminals at the positive terminal.
Use conductive grease.

DeOxit had the free sample, check their site for a tiny sample.
You should spring for an 8 Oz tube of Penetrox-A for your connectors about $19 shipped at Ebay.
Wilson noticed his CPS failed after disconnecting to do a head job, sounds like a corroded connector and not the CPS itself that crapped out.

Keep cool, Bill






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.