The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

New tach is questionable 200 84

posted by  someone claiming to be Hank on  Tue Nov 28 14:09 CST 2000 [RELATED]

Just installed a new (old) tach in place of the large clock in the instrument pod.

Ran a 14ga. wire from the (#1) terminal on the coil to the tach, and installed the harness from the new small clock I also installed.

The tach seems to read quite low - my idle is about 1300 rpm (another story), and the tach reads just above 0. At crusing speed (auto tranny), the tach reads about 1600 rpm.

Noticed today that the tach needle was bouncing around from 0 to 2000 rpm for a short time, while driving - no other simptoms raised thier head.

Is there an adjustment for the tach? What other problems may there be?





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.