The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: 242glt/230 intake swap? 200 83

posted by  someone claiming to be nedc on  Sat Mar 3 02:26 CST 2001 [RELATED]

I just finished doing one and for me it was a bit of a PIA. Haven't driven the car yet, so I hope it was worth the effort! i studied all the directions from others and still had some troubles. I opted to use the B21 throttle body so I would not have to resolder a TPS. If you use the B21 TB you have to adapt the part of the linkage hich triggers the micro switch for the idle motor. Be sure and get a throttle cable from a 240 that used the B230 motor, a 740 cable won't work. Be sure and get the brackets too. If you have cruise control you will need them. I had to cut a section of the intake between the 1 and 2 runners for my cpr fuel lines to go thru. Stuff like that…it tkes time. Good luck





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.