The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Flywheel Re-assembly 700 1988

posted by  someone claiming to be nic on  Sat Mar 31 09:13 CST 2001 [RELATED]

Hello Everyone,

I am re-installing my clutch on my 5 speed 740GLE. I had to remove my flywheel as I replaced my 1988 motor with a 1990 motor. I have a round metal plate (approximately 1cm+ thick)with 8 holes & a thinner metal plate (approximately 2mm thick)that is curved at the edges. If I place the thicker metal plate on the flywheel & then the thinner one, then bolt all three (including flywheel) to the engine, the clutch does not sit flush with the flywheel. When I attempt to turn the clutch, by hand, with it in contact with the flywheel, it comes in contact with the heads of the bolts. I have the clutch turned the correct way.

My question is, do I need the thicker metal plate in order to properly install the flywheel?

Any help would be appreciated.

Many thanks,

nic





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.