The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Timing gears 140-160 1973

Breaking teeth in and of itself shouldn't do more than cause a rattling sound. It is possible, however, that it has jumped a tooth (or more), or (also relatively common on older/long disused engines) that one of the gears the outer (teeth) ring has slipped on the hub, causing massive timing shift. If it ran OK before being laid up and wasn't disturbed during that time, you shouldn't have to rotate the timing cog on the cam. These things don't jump by themselves. I'ld advise you to put that back the way it was, pull the timing cover and see if cam and crank still line up. These are non-interference engines, so no harm will be done if it shifted, and you'll do no harm by realigning them and putting in a new timing gear kit (about $70-$120 depending on quality and supplier). Use OEM style pertinax gears for quietness or 164E/aftermarket metal gears for longevity at the expense of a slightly higher noise level.

Bram






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.