The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: How to read error codes? 200 1992

posted by  someone claiming to be Whitt Wilkins on  Mon May 14 09:46 CST 2001 [RELATED]

On my 89 244 (b230), the code reader is behind the right strut tower if you are facing the engine from the front. Take the little plug thingy out of the cover. Take the cover off. Stick the little plug thingy into the hole labeled #2. Turn the ignition all the way on(but don't crank it up). Press the little black button for 2 seconds. A red light should be on while u hold it down. When you release the button, codes will flash. Example of 1-1-2, the light would flash once, pause, flash once again, and then flash 2 times sucessively. If you have other codes, they will flash sucessively. You also need to stick the plug thingy in socket # 6. Write all of the codes down and then post them here.

If you need help, post and I will try to help you out.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.