The message to which you are about to reply is shown first. GO TO REPLY FORM
posted by
someone claiming to be Mike Brown
on
Thu Nov 1 16:55 CST 2001 [ RELATED]
|
|
Where do i hook up a boost gauge??? what vacuum line do i connect it to so that my gauge that reads 0-30 psi can tell me what psi my boost is at??? i have a 91 740 turbo. i am thinking it is the little short vacuum line (like 3-4 inches long) that goes from the bottom of the turbo(is this the waste gate?????) to the side of it(where it measures engine vacuum RIGHT????). i am not very sure of this. i have connected it to other lines that go to intake manifold but those all just read engine vacuum so nothing great.. and under the dash the vacuum line from gauge cluster reads from like 20-0-20(but is not numbered just colors) or something like that so i can't hook it up to that line so i can't connect my gauge i got to that. Do i need to get a gauge that goes from like 20-0-20 to read the boost properly???? Or is there a way to make this one that i have work. i have seen other people with the 0-30 like mine but i have yet to talk to them about it seeing that in the last 4 hours i started this project and am stumped now. Any help or tips would be greatly appreciated.
mike
|
|
* = Field is optional.
+ = Enter space delimited labels for this post. An example entry: 240 muffler
©Jarrod Stenberg 1997-2022. All material except where indicated.
Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.
