The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Spindle Nut Tightening Procedures 700 1986

posted by  someone claiming to be General Bain on  Tue Jul 3 16:32 CST 2001 [RELATED]

I just replaced the ball joints on my 740 and recently the tie rod ends. I did this after noticing the car wanders on highway irregularities. I used to have the one piece hub and rotor but upgraded to the two piece versions. What are the proper spindle nut tightening procedures for this car now. My green manuals have them from my older version, which is to tighten and release so the cotter pin keeper aligns with the spindle hole.

I just want to make sure the hub/rotors are properly tightened. Yes I looked in the 700/900 FAQ.

TIA, wb

I also need brake pads and I could use an alignment and the tires are cupped in the middle, 205/55-HR 15. Comp/TA's.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.