The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

I don't know were this wire goes 200 1987

While I was replacing the flame arrestor under the intake manifold I notice that there was a cable loose. This cable comes from the firewall at the left side of the big round compartment were the brake master cylinder is attached. Three or four wires come out from the above place.

One is the accelarator cable. An other goes along the fire wall to the gray junction box in the fireeall. An other one goes all the way to the front of the car near the air filter compartment.

And the loose one is about 8 inches long (with insultaion), it has a connector at the end of it with a small boot to cover it. The small rubber boot has like rubber ears so you can pull the connector out from where it goes. I looked in the Hanes repair manual and I can not fid were it goes.

Please advice







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.