The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: s u carbs 444-544 1959

posted by  someone claiming to be Steve Seekins on  Fri Sep 11 07:39 CST 1998 [RELATED]

If there are a lot of miles on these carbs, then it is likely that the castings are worn where the throttle plate shafts pass through them. New gaskets will not help this problem and they will not produce a good idle.

I would strongly recommend that if they have not been rebuilt in recent years that you consider sending them up to Tom Bryant in W. Bath, ME - He will rebuild them completely including boring out the throttle shaft journals and installing oillite bronze bushings as well as improved teflon jet seals. I think that whole shebang is about $130 for both carbs including machine work and parts. Just be sure to clean them thoroughly before shipping - he charges extra if he has to clean them!

Tom Bryant, PE 207-443-6338





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.