The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Throttle Body Service 140-160 73

Craig --

One important aspect of adjusting the throttle on the early electronic FI systems is to be sure the throttle switch does not act as the mechanical stop. So you need to adjust the throttle (mechanical) idle position with a set screw, then adjust (rotate) the throttle switch so there is still a bit of rotational freedom.

As I recall (and it has been a while since I looked under the hood of my ES's -- like 15 years), the switch has a series of "zig-zags" that a wiper slides across as you open throttle. The computer counts the "make-breaks", and infers throttle position. There's also a contact closure that tells the computer when you've returned to idle position.

It's important that the switch not be the mechanical stop AND that the idle contacts still close. It's a delicate adjustment.

A good way to clean the "zig-zag" printed circuit in the throttle switch is with a pencil eraser.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.