The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Won't start 240-260 1986

ICQ>

There should be a spark while the engine is cranking. Your condition could be due to several causes.

First - you need to do the electrical system maintenance task. Clean and treat all fuses/holders, unplug and clean all underhood connectors and treat with dielectric grease, unfasten, clean and refasten ground leads - especiallly those bolted to aluminum intake manifold. If there is lots of high resistance corrosion in the elecrical system, the ignition unit may not be getting sufficient voltage to operate while the starter is running.

Check you battery, battery terminals, and battery/engine ground straps.

Check your fuel pump relay - gets hold closed signal while starter is running, then gets signal from coil to keep closed. If this starter signal is missing, you will not get fuel pump or ignition while cranking.







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.