The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Clutch/tranny won't work 700 1986

I've got a 740 turbo that chewed up its transmission. The overdrive was intermittent for months until finally reverse only worked when the car was cold. I bit the bullet and got a transmission & OD from a wrecker and put it in yesterday. With everything back together I ran the car up on jackstands. Every gear worked fine; then I put the car back on the ground. With the engine running it won't go into any gear. Reverse just grinds, the other forward gears don't make noise, but the gear lever won't move out of neutral.

It's a hydraulic clutch. I noticed when I took the slave cylinder off the operating rod migrated fully out. On reinstallation I pushed it back in and clipped the cylinder in place. I've bled it repeatedly now and am not seeing any bubbles. It seems to move, but I'm not sure how much movement is necessary for full actuation. Does anyone know offhand how much the slave cylinder should move?







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.