The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: are front buckets interchangeable? 200 1984

posted by  someone claiming to be Michael on  Mon Dec 3 19:51 CST 2001 [RELATED]

Before you take apart the seats entirely, try swapping just the sliders (4 12mm nuts) and see if the seats fit with the knobs nearest the inside. I just went through the process of adding the height adjuster to a passengers side seat (salvaging it from a drivers side seat). I found that the drivers side frame & sliders didn't fit quite right on the passengers side, so I ended up changing the sliders after I had already changed the entire frame. The nuts holding the seat to the floor are 13mm, the drivers side frame nuts were 13mm, the passengers side frame nuts were 12mm, and the slider nuts were 12mm. The 12mm/13mm Volvo wrench that's part of the tool kit was very helpful to get in where my 13mm deep socket wouldn't fit.

Good luck.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.