The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: knock sensor sensitivity 700 89

Thanks for the response Gene. If I had a leak, would I still see the full turbo pressure at the gauge? ( I don't know where the gauge pressure is tapped) I've checked (removed and individually inspected ) all the hoses and connections from the turbo to the T.B. I think I may have to try to pressure test from one end to the other to be sure. I did something interesting the other day, I changed out the AMM in the evening and reset the mixture. The car test drove like it had never run before (read "like a bat out of hell!"). I was thrilled and thought I had finally found the problem. The next day, It wasn't as strong (it's always been weak in the morning). Since then the performance seems to be changing subtly. I'm wondering if the ECU is changing to adapt to the different AMM signal. I'm going to set it up to be able to swap them out quickly to see if there is any change.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.