The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Help Me! I'm Lost! 700 1987

posted by  PropMgr on  Fri Dec 28 15:28 CST 2001
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Thanks for the responses. The wiring diagram that I have is from the Haynes manual on page 132. I had not thought about checking the output from pin 1. That should give me a good idea if the power stage isn't working. According to the diagram, I should be able to check at the coil for switching voltage. I will give that a try tomorrow. I don't remember if I mentioned in my post but I did remove the wiring harnes from the power stage and clean the contacts as well as behind it where it attaches to the heat sink. Both were clean but I cleaned them anyway with electrical contact cleaner and seated the power stage to the heat sink with diaelectric grease.

I will check tomorrow and let everyone know what I find. Thanks again!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.