The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Need an electrical guru's help now. 86 245 200 1986

Ok,

I have posted a few times recently about my 245's problems.

a recap: The car will barely run with the AMM hooked up.

unhooking the AMM results in an easy start and idle.

So, I patched in a new ECU and the symptoms remained the same.

So then I broke down and got a replacement Air mass meter and thought for sure I would have things licked, but NOPE.

With the new AMM, the symptoms are the same. starts and idles without the AMM hooked up but with it hooked up, dies.


Anyway, the wiring harness I have installed is a replacement I bought in the fall from ebay.

It looked fine though, but I'm wanting to know of some possible things to trouble shoot in the wiring harness. I am pretty sure I hooked it all up properly. But now I'm worried that the problem may lie in the wiring.

Do any of you old pros have any suggestions?

I have 2 air mass meters, two ECUs, and i'm clueless :)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.