The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

122 won't start

Hello all,

After changing the points on my '65 122s, it wouldn't start. After seeing nothing wrong, I check for a spark from the coil-to-dist. cap wire. It produced no spark. I traced low-tension current all the way to the ignition switch from the battery. All three terminals around the center of the switch have current. Not the center terminal that projects forward (I can't tell what is what on the switch). Current exists between fuse box terminals 3 & 4. No current comes off the small low-tension wire terminal on the engine compartment side of the coil. According to my Haynes manual, either I have no current to my coil or a bad coil. Does this sound right, and if so, would this be entirely coincidental to me replacing the points?

Thanks in advance,
-Smitty






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.