The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Front and Rear Door Panel 900 1996

posted by  someone claiming to be Kenton (I am) on  Fri Jan 11 07:36 CST 2002 [RELATED]

The door panels on my 240 are held on by little white clips that go into holes in the sheet metal of the door. I doubt that your car is much different. Try looking at the space between the edge of the door panel and the sheet metal of the door when you pull the panel away from the door. You should be able to see the little clips. A flat screwdriver is a good way to get some leverage to do this. The clips will pop out of place and you can do your repair and then the pop back in. Don't pull too hard, or you will leave a clip in the sheetmetal when you pull the panel off. You'll then need to take some pliers to pull it out (there are probably 10-15 clips per door panel, so if you loose a few it isn't a big deal).






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.