The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

AMM adjust with dwell meter 1985 240 200

posted by  p3pete on  Wed Jan 16 10:39 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I read some archive posts here about adjusting AMM with a dwell meter . As I have not had time to pick up the LED and resistor I decided to try the Dwell meter method . When I initially hooked it up the needle was steady at about 30 degrees . I couldn't get the need to swing until I turned the screw several turns Clockwise ( CW )- that post said something about turning it CCW. I can fine tune it to the swing in the 20-70 range. Do I still need to go down (CW) more or back off (CCW) the that setting to slightly richen the mixture. I am a little confused and would appreciate so help. -thanks





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.