The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

DEXCOOL Roundup

I agree with you: one data point does not a trend make. That's why I asked for more feedback from members. There has been one published SAE paper questioning solder protection with OAT coolants, and that has been contradicted by Texaco and GM. There is ONE weakness with Dexcool, well-documented by GM, resulting from poor coolant maintenance: if you let your coolant level drop, the coolant can form precipitates on radiator caps and in coolant bottles (shown on GM cars). The solution is simple: just make sure the level is at the minimum mark.

Ford and Daimler-Chrysler have been a little more conservative about coolant technologies, and recently approved the OAT-plus-low-silicates model used by Glysantin (Zerex/BASF) which will be sold this year in the US under the Zerex brand name. It has a little more aluminum protection and has been used by Mercedes for some time.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.