The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

exhaust stud to head fix 200 1983

posted by  someone claiming to be Brian Cooney on  Thu Jan 24 05:46 CST 2002 [RELATED]

One thing that may help you...

especially if the bolt is flush with the metal around it or sticks out a bit...

Put a nut over the stud and weld the nut to the stud. Then just turn the stud out. This may tak a few tries, but it often works and is a HELL of alot easier than trying to drill the damb thing out. It would probally be a good idea to run a appropriately sized thread chaser (aka a tap) thew the hole a few times to clean up the threads before you put in a new stud after you get the old stud out.

Good luck :)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.