The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Running on two cylinders? 700 1987

Here's the problem. Car starts and idles like a washing machine. Won't run much. On high rmp (3-2K) I hear a loud tick tick tick noise. Someone said it sounds like a dropped valve?

It's runing on number 1 and 2 (from firewall). If I disconnect plug wires 3 and 4 it'll still run the same. No change. (I get spark to all cylinders)

I checked the timing it's fine.
I checked the wires, dist cap, hall sensor ect all fine
I checked the coil, good ohms.
I checked the plugs, all fine (3 and 4 have a dark carbon coating)

After meddling around with the AMM and the hall sensor, no change. Both are in working order. I do plan on doing a compression test tomorrow. Wiring looks fine.

Fuel injectors are have the same resistance.

Anything else to check if the compression test is good?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.