The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Thanks for the help but.... 200 1986

With the post "HELP! Car Killing batteries {long} 200 1986"
I made the changes but the alt is giving me a little trouble.
it is know charging the Battery but it is moving between 12.9 and 15.1
When it was sitting at the house it was at 14.2 and steady then on the drive to the super market when over RR tracks and the inst light started to glow dimly at the light and when out as soon as I hit 1,200Rpm.
I took out the part that has the reg in it with the two brushs to check andboth at full height. the Problem was trying to put it back in. which I did but i think it may not be seated right. Both fasteners back on tight but can not tell
the inside condition can not see it
Q. If is not seated right will that give my the above condition
Q If so I need to remove again what is the best way to put back in right
Q if seating is right can the reg be bad even with new looking brush






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.