The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

O/D switch replacement 700


Just pull straight up on the knob with all your might. The knob will pop off and the wires taht hook onto the button will pull off when it comes up. There is nothing actually holding the knob on other than friction, so don't worry about breaking anything. this is actually much easier than damaging the top f the knob by trying to use a scredriver to pry it off from teh top down.

Once you get the knob off just push a screwdriver up the hole from the bottom of the knob and push the button + gear map cover plate (they are two different items) out. Once you have this done remount teh knob with the button or plate on, and lead teh wires through the top. This can be annoying since there isn't much slack in teh wires, but be patient and it will work. Connect the button, but it down in place, and push the cover down into place on the top (it slips in on teh perimeter, sliding under a lip in the rubber knob).

Good luck,
Rick






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.