The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

A/C quit working 700 1992

Hello Don:

One of the chief reasons that compressors don't come on is because the freon charge is low. There is a pressure switch on the receiver/dryer (upright cylinder near the passenger side firewall under the hood. Remove the pressure switch from the r/d, and jumper the connections with a piece of wire with the a/c controls set to max and air on. Now the compressor should run. Don't do this for more than a few seconds because if the charge is low this will ruin it...

If the compressor runs, then you need to start looking for a leak. Mine did this recently-- the relay that runs the aux fan in front of the rad cooked, the a/c system got hot, the pressure went up and blew out the condenser-- $$$ ouch!

Let's hope yours is something simpler-- I had mine converted to R12a because freon no longer available here...






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.