The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuel Pressure Longevity 1800 1973

I agree that this should only cause a momentary hard start condition.
It is on cold start. After the 2nd try I can get it running if I work the accelerator. After about 15 seconds of nursing it, it will idle, roughly, at a slower than expected RPM, until it warms up a bit.

I have been using the FI manual I found refered to on this site. Wonderful document. Checked the function and values for the sensors based on that. I have not checked at the controller which is the best way and probably my next step. I have replaced the engine temp sensor (the front one). Plugs look OK. Wires OK. Timing on. Valves are OK.

I think my very next step is to check the contacts in the throttle position switch. It may not be getting the proper "I'm at Idle" signal.

Thanks for the support as I work through the bugs.

Jeff Kerr






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.