The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brembo brake rotor fit problem 200 1986

uid 27's pic
posted by  Art Benstein on  Fri Mar 15 13:20 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 20:10 CST 2014
[RELATED]

Lucky me, I have some used Brembos in original box marked 270739. One measures .863 or almost 22mm as my green book specs the 260 vented Girling for new.

I notice the 240 vented calls for a 24mm thickness - new. I know these Brembos were never that thick, so I'm guessing they made one replacement part for both models - 270739. Pretty sure the -6 is just Volvo's check digit.

Just in case it might be helpful, I measured from the inner boss that seats against the spindle to the most inboard side of the rotor face: 2.405" These rotors of mine were almost new, but quickly warped, which might be another story involving tire shops...

Hope this helps,
--
Art Benstein near Baltimore






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.