The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Clunking noise in front end; Help, please? 700

Clunking noises are hard to diagnose. Most common causes: front strut rod bushings (where the strut rod meets the control arm), lower ball joints, sway bar bushings. Less likely causes: outer tie rod ends, inner tie rod ends, upper ball joint / upper strut bearing, rear strut rod bushing (where the strut rod bolts to the frame), inner control arm bushing (where the control arm bolts to the frame).

Take a look at the rubber boots on the lower ball joints... if they are split, I'd replace them. While you have the front end disassembled, I'd go ahead and replace the conical front strut rod bushings, sway bar bushings, and outer tie rod ends also. Total cost for parts should be around $100, maybe $150 from your favorite online parts vendor. Labor around 3 or 4 hours (it least that's what it takes me). You'll also need a front-end alignment ($50).






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.