The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to remove Trim 120-130

posted by  Danny on  Wed Apr 3 08:34 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 6 22:01 CST 2014
[RELATED]

The thinner trim pieces on the door just below the window(s) is held on by clips taht are riveted to the body. In order to remove them you must gently push the trim up enough to then be able to pry the top edge off of the clips, after which you can let the trim descend enough to release it fromt he bottom part of the clip. Replacement clipas are available if yours are rusted. I used pop rivets to reinstall the new clips.
Windshield trim: I presume you are removing the trim in order to replace the seal, in which case, I would carefully cut through the seal along the trim pieces to release them. As George says, release the sides, and then carefully and concurrently, slide the top and bottom out from the center. I've never removed the trim in order to just replace the trim -






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.