The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Hall Sensor - Update 700 1987

posted by  PropMgr on  Sun Apr 14 12:52 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Well, it isn't the hall sensor. It's the wiring, either in distributer or wiring harness. I connected the distributor to the wiring harness and while moving around, it fired the injectors and the lead from the coil. Sometimes it will fire while rotating the distributor shaft but not what I consider consistently.

I checked the wiring harness and found some of the insulation missing so I did a down and dirty repair with liquid insulation. It looks like I will not be able to avoid replacing the wiring harness too much longer. The connection block at the disbutor is new so I know that isn't the problem.

I'm going to check it later when the liquid insulation has dried. Hopefully, it will work for now. Thanks for your help again! Your test sequence for the hall sensor was great, it allowed me to isolate the problem.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.