The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

draining the M40 140-160

Considering that the drain plug is at the very front most part of the tranny, I would say that indeed, you would want the car as level as possible in order to completely drain it. Or...have the rear jacked up. But...it was probably also just very low on fluid.

If you have a small level, you can hold it up to the side of the tranny at the bottom of the drain hole...that will show you how much you ain't getting out due to the angle.

Them oil pumps are the best way to re-fill...but if you don't have one, it is easy to tape a hose to the end of a bottle, and feed it into the filler hole from up under the hood. Then just let gravity do the work. Its a pain to try to squeeze the oil up from the bottle from under the car.

Have fun!
-Matt






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.