The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Shaky mirror 900

posted by  someone claiming to be ringlee on  Tue May 28 11:27 CST 2002 [RELATED]

My suspicion is that your motor is loose. To tighten, remove the mirror glass carefully. The mirror glass is held on with four plastic clips that snap onto a holding ring, assisted by four conical locating pins. Move the mirror down so you can see the clips from above with a flashlight. Stick a screwdriver in there and unlock each clip sequentially while moving the mirror around and pulling on the glass. Then pull the mirror off (this is where you drop it!). Tighten the motor screws (use locktite) and reassemble, making sure you connect the heater wire if equipped.

If one of the mirror clips is gone, then you will need another mirror glass.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.