The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cold air induction.. have I done it right so far? 700

And what else should I do?
I`ve checked FAQS archives etc ut the more I read the more confused I got.
What I`ve done..
Removed hot air supply tube from manifold to airbox.
Attached to port of airbox length of 64 ml heat resistant flexible hose.
Because of lack of room below airbox and impedence caused by assorted hoses hydraulic lines etc have run hose up around rh intercooler pipe, over the top of the motor in front of the oil filler, behind alternator, around other intercooler pipe, over battery and into space in front of it.
I know it sounds complex but cable tied into place doesn`t rub interfere or otherwise get in the way of anything.
In due course will cut hole in bottom of battery shelf and run hose out into the fresh air behind the bumper.
Sound good so far?? It does work judging from the amount of suction it generates with motor running.

Cheers Mike
--
1989 744ti, turbo plus, turbo timer, exhaust mods






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.