The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

air mass meter - yes/no and CSI wiring 700 1990

Does a 1990 740GL have an air mass meter? I've looked all around the intake manifold, air box, throttle body - I don't see anything like my manual depicts. I noticed that the partsamillion web site only shows the AMM for 740 8-valve cars through 1988. Did the 1990 version not use an AMM? If so, where in the heck is it located?

Does anyone have the cold start injector wiring pinouts? If they both connect to the ECU, what pins in the ECU harness? Can I static test at at injector pins for resistance? Should it be the same as the other injectors (~14 ohms)? Is there any other way to test it while mounted - I did see the post about removing it, putting it in a jar and turn the engine over without starting to test for leakage. The diagnostic connector is still logging a 3-2-1 code, no signal or signal wire grounded to CSI.

Tommy
1990 740 GL sedan (B230F), 170K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.