The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Two ES questions 1800

PS - A good way to check ball joints: Carefully jack the wheel up with the jack under the end of the bottom suspension arm. This will remove the weight of the car from the ball jint. Jacking the car up any other way will allow the suspension to fully extend (upper arm hits the top-out bumper) and still allow the spring to put force on the lower ball joint. Once the wheel is jacked up and the tension is relieved you can try wiggling the wheel bottom in and out. With no pressure on it a worn balljoint will clunk around and be noticably slack. Under tension the worn ball is pulled firmly into the socket and won't clunk until it breaks totally free.

Other warning signs: Torn or dry rotted boots, squeaking.

PS - Use the above method to replace them to. Thankfully on an 1800 they bolt on and aren't hard to replace at all.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.