The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Temp gauge is a yo-yo and no vent control 200 1986

I removed the temperature compensating board for the pictures.

The temp compensating board attaches to the main cluster PCB by four pins. I presume these are power, ground, signal in, signal out.

I've repaired several boards by resoldering the boards and cleaning and tightening the connectors (where it grips the pins).

But I've also repaired several other boards by replacing the integrated circuit and the transistor. I bought a bag of the ICs on eBay for a few bucks, so have a lifetime supply. However, in the past, I sent several of these ICs to another BB'er who was unsuccessful with his repair. So a bad IC is not always the reason for failure. (Even so, it only cost him $0 -- he had no reason to complain).

Others on the BB have described a means to bypass the temp compensating board. I've not tried this.
--
Don Foster (near Cape Cod, MA)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.