The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A/C conversion questions. 200 1983

I'm trying to do the conversion. I have a kit with the new fittings & o-rings. I have the new oil, a can of stop leak & detector & 3 cans of r134.

I wanted to start by installing the new fittings on the pump, problem is the shrader valve (if that's what they are) is in the way. Am I suppose to remove the valves in the filler ports on the pump? The instructions are very vague.

I think I'll start by bringing the car to get it evacuated. Then I'll get it home & clean out the pump. (remove the old oil if I can) I have a new expansion valve & dryer which I'll replace. As well as any of the o-rings as needed. But what else should I do? I've never done this & it's getting really hot around here.

What I was planning on was just evacuating the system, replace the fittings, orings, dryer & expansion valve. Install the oil the stop leak (precaution) & add the r134. Is that it?

TIA.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.